Econolite03
Member
Offline
Gender:
View
Posts
View Gallery
Matthew E.
|
1 type was square with a grid on the front of maybe half inch squares. Beyond the grid there wasn't much to it other than some kind of nut and bolt in the center of the alarm.
The other kind had 2 triangular horns on their sides that faced away from each other.
Hi Jamie, I believe the device you’re describing is the Simplex 4050 alarm. This model has a grate with small squares on the front. Another model I should mention is the Simplex 2901-9833 alarm, which also has a square grate except with big squares on the front. The triangular 2-way horn contraption you described, is actually a accessory that Simplex sold that is added on to the front of a existing alarm device, the accessory horn attachment is 2905-9907. In regards to how the 4050s work, behind the front grate is a metal disc that is attached to a nut. When the alarm is sounded, the disc vibrates rapidly and the friction creates the buzzing noise. Hope this helps! I used to be into alarms years ago.
|
|
« Last Edit: May 04, 2021, 12:48:42 PM by Econolite03 »
|
Logged
|
|
Desultory13
Guest
|
Hey Thanks for the information! That helps a lot! Thinking back the alarms had to be the Simplex 4050. One thing that confuses me is that when I checked the link Simplex was listed as the brand but Federal Signal was shown as the manufacturer. Are these 2 companies affiliated? Interesting to find out how these work. Let me tell ya these things are MONSTERS! Not in size but in SOUND!! The idea is to get kids attention but don't terrify them! I wonder if the 4050 is still made? Not sure but I think the building codes nowadays requires strobes on the alarms?
|
|
|
Logged
|
|
LightsoftheWest
Member
Offline
Gender:
View
Posts
View Gallery
SRP for life.
|
Hey Thanks for the information! That helps a lot! Thinking back the alarms had to be the Simplex 4050. One thing that confuses me is that when I checked the link Simplex was listed as the brand but Federal Signal was shown as the manufacturer. Are these 2 companies affiliated? Interesting to find out how these work. Let me tell ya these things are MONSTERS! Not in size but in SOUND!! The idea is to get kids attention but don't terrify them! I wonder if the 4050 is still made? Not sure but I think the building codes nowadays requires strobes on the alarms?
I would assume that Federal Signal made older Simplex alarms, and Simplex stuck their name on them. As for the 4050, I don't believe they are made anymore. Those were mechanical, and modern alarms are electronic and have specific requirements made by the ADA, which were set sometime in the 1990s. Alarms don't have to have strobes on them if they're installed in a specific area.
|
|
|
Logged
|
LG's #1 North American light fixture identifier
**If anyone wants to learn more about any company or product you've never heard of before, do please leave a comment saying so on one of my gallery pictures or by PM, and I'd be happy to give a thorough explanation.**
|
Lumex120
Member
Offline
Gender:
View
Posts
View Gallery
/X rated
|
Honestly, I kind of hate fire alarms lol. I had a really traumatizing experience with a fire drill when I was in preschool and it's stuck with me since. Whenever I'm somewhere and an alarm goes off it still makes me jump and there have been a few times I've had a panic attack from it.
|
|
|
Logged
|
Unofficial LG Discord
|
dor123
Member
Offline
Gender:
View
Posts
View Gallery
Other loves are computers, office equipment, A/Cs
|
Here is a smoke detector in my room, that belongs to the fire alarm of my hostel: It don't have siren however, since this is a hostel for guys with Autism Spectrum Disorder. The fire alarm system itself is enclosed in the hostel pantry.
|
|
|
Logged
|
I"m don't speak English well, and rely on online translating to write in this site. Please forgive me if my choice of my words looks like offensive, while that isn't my intention.
I only working with the international date format (dd.mm.yyyy).
I lives in Israel, which is a 220-240V, 50hz country.
|
nogden
Member
Offline
Gender:
View
Posts
View Gallery
Nelson Ogden
|
I'm not a collector, but I do maintain two fire alarm systems for my employer. Both are Edwards LSS4. No one else wants to maintain them because of their age, so I do it! We also have an Edwards EST2 that I sometimes work on, but is too software-centered for my likes. The LSS4s have a microprocessor but are otherwise just simple (conventional) systems.
|
|
|
Logged
|
|
dor123
Member
Offline
Gender:
View
Posts
View Gallery
Other loves are computers, office equipment, A/Cs
|
|
|
Logged
|
I"m don't speak English well, and rely on online translating to write in this site. Please forgive me if my choice of my words looks like offensive, while that isn't my intention.
I only working with the international date format (dd.mm.yyyy).
I lives in Israel, which is a 220-240V, 50hz country.
|
icefoglights
Member
Offline
Gender:
View
Posts
View Gallery
ITT Low Pressure Sodium NEMA
|
I have a few smoke alarms in my collection, and used to have an 1950s pull station that came out of my school, but I gave it to a friend.
My school actually used a bell system. The older buildings had simple bells. The (at the time) newer part of the building, built in 1979, had bells with flashing red lights under them. I think they were made by Simplex, but I'm not sure. I think I found something on them at one point and time, the lights actually used a pair of 194 automotive bulbs wired in series, and would blink on and off while the bell rang.
|
|
|
Logged
|
01010010 01101111 01100010 01100101 01110010 01110100
|
sol
Member
Offline
View
Posts
View Gallery
|
It don't have siren however, since this is a hostel for guys with Autism Spectrum Disorder.
Just curious, what does the alarm sound like if it doesn't have a siren?
|
|
|
Logged
|
|
dor123
Member
Offline
Gender:
View
Posts
View Gallery
Other loves are computers, office equipment, A/Cs
|
Only the siren near the system is activate. With the smoke detectors, there are red LED flashers at the entrance of the rooms and at the smoke detectors that flashig according to the location of the smoke.
|
|
|
Logged
|
I"m don't speak English well, and rely on online translating to write in this site. Please forgive me if my choice of my words looks like offensive, while that isn't my intention.
I only working with the international date format (dd.mm.yyyy).
I lives in Israel, which is a 220-240V, 50hz country.
|
boiler1011
Member
Offline
Gender:
View
Posts
View Gallery
|
I have a very mild interest. I used to seek out information on the various common appliances made here in the US, but have never had anything more than a random horn/strobe I found on eBay or in trash piles. I have always been interested in the Simplex chime strobes with the single bar chime at the bottom, so I recently found a new on online and bought it as well as a strobe plate. Eventually i'd like to get an electromechanical horn and triangular bowtie projector and then I'll have everything I want. My elementary school had an entire system of Wheelock MT-24-LSMs (vertical config) set to slow whoop. Whenever the redid the building I was given an entire box of them. They might be in my parents' attic still, not sure where they all went.
|
|
|
Logged
|
|
boiler1011
Member
Offline
Gender:
View
Posts
View Gallery
|
Oh also I made this lamp.
|
|
|
Logged
|
|
LightsoftheWest
Member
Offline
Gender:
View
Posts
View Gallery
SRP for life.
|
Y'all should check this out, it's awesome!
|
|
|
Logged
|
LG's #1 North American light fixture identifier
**If anyone wants to learn more about any company or product you've never heard of before, do please leave a comment saying so on one of my gallery pictures or by PM, and I'd be happy to give a thorough explanation.**
|
Foxtronix
Member
Offline
Gender:
View
Posts
View Gallery
Formerly "TiCoune66". Also known here as Vince.
|
Fire alarm systems was the subject of one particular course I had in the electricity program I attended in tech school back in 2010-12. It sparked (duhuhuh... "sparked" ) a transitory interest for those systems. At some point I had a small conventional fire alarm system working in the basement (I think I even left it on 24/7 for quite some time) and I was still planning new devices, the boxes and cables were even already installed, when came the time to move out. I still have everything in storage. Maybe one day I'll rewire it. The fact I was able to get scrap cables and devices made this project quite fun. Namely I turned a pile of broken bells into one working unit. I think I also saved a fixed-temp heat detector with stripped terminals or missing screws, I don't remember. There's that photoelectric detector sans its base (nothing a $15 eBay purchase couldn't fix LOL) that I got the same way.
|
|
|
Logged
|
|
AgentHalogen_87
Member
Offline
View
Posts
View Gallery
Long Live SOX!
|
Yes I am. My favourite company is Apollo, least favourite Protec. Favourite tone is HI-LO, least favourite continuous.
|
|
|
Logged
|
|