Emersyn
Member
Offline
Gender:
View
Posts
View Gallery
|
School isn't typically the place to see great things (though there are many good lights at my school)... But today I was very pleasantly surprised to see one of the two 1960s wrap arounds in the auditorium that had been converted to T-8 in the 1990s, and had been out for a few months (leaving the entire staircase pitch black)... Was running two brand new American 2020 Philips Alto F40T12/CWs!
I was very very shocked to see it as I haven't seen a single T-12 lamp at my school and I have seen a lot of lights at my school! I didn't have any camera so no pictures for now, but it was such a great sight to see! Perhaps, whenever the other wrap around on the other side of the auditorium gets relamped (it's in kind of a sorry state), it will also get two F40T12s! I wasn't able to tell what ballast the new F40T12s were on but either way it's so cool!
That fixture got converted from T-12 to T-8 back to T-12!
|
|
|
Logged
|
If you have any questions regarding fluorescent lamps, feel free to ask me! I will do my best to answer it!
|
Roi_hartmann
Member
Offline
Gender:
View
Posts
View Gallery
|
Nice to hear someone still repairs stuff unlike the "let's just replace the whole thing" mainstream culture of nowadays.
|
|
|
Logged
|
Aamulla aurinko, illalla AIRAM
|
Emersyn
Member
Offline
Gender:
View
Posts
View Gallery
|
Well at my school (and probably in the district) there just doesn't seem to be enough money for that. A bunch of surface mount troffers got some not so good LED tubes in them a few years ago. While the fixtures look decent and like they're little with T-12s a bit with a slightly pinkish glow, all of the tubes have slight uneven brightness variation! Another section had these weird weird modern F32T8 'troffers' converted to LED and those ones are just completely bad. The fixtures have one ballast for every 2 fixtures seemingly and there are some pretty wild looking tubes... Some flickering, some purple, some slightly brown, some looking terrible, and some with all those traits!
|
|
|
Logged
|
If you have any questions regarding fluorescent lamps, feel free to ask me! I will do my best to answer it!
|
WorldwideHIDCollectorUSA
Member
Offline
Gender:
View
Posts
View Gallery
HID, LPS, and preheat fluorescents forever!!!!!!
|
I wonder if that fixture had its electronic ballasts replaced with magnetic ballasts.
|
|
|
Logged
|
Desire to collect various light bulbs (especially HID), control gear, and fixtures from around the world.
DISCLAIMER: THE EXPERIMENTS THAT I CONDUCT INVOLVING UNUSUAL LAMP/BALLAST COMBINATIONS SHOULD NOT BE ATTEMPTED UNLESS YOU HAVE THE PROPER KNOWLEDGE. I AM NOT RESPONSIBLE FOR ANY INJURIES.
|
joseph_125
Member
Offline
Gender:
View
Posts
View Gallery
|
I'm guessing T8 ballast running T12, someone probably bought T12 lamps because they were cheaper than T8 lamps.
I suppose it could also had the ballast swapped for T12, they still make T12 electronic ballasts.
One of my louvered fixtures had a T8 retrofit done in the early 90s when I got it. I converted it back to magnetic T12 when I cleaned it up.
|
|
|
Logged
|
|
Emersyn
Member
Offline
Gender:
View
Posts
View Gallery
|
I would be a bit surprised if it has a proper T-12 ballast, but other than brightness, is there any other way to tell?
I ended up going near it again today, but I wasn't expecting it and I didn't have anything to get a photo with again! I'll have a photo on Monday
|
|
|
Logged
|
If you have any questions regarding fluorescent lamps, feel free to ask me! I will do my best to answer it!
|
WorldwideHIDCollectorUSA
Member
Offline
Gender:
View
Posts
View Gallery
HID, LPS, and preheat fluorescents forever!!!!!!
|
I think that one way to determine if a proper magnetic ballast is used is to see if a digital camera picks up any flicker bands from the lamps.
|
|
|
Logged
|
Desire to collect various light bulbs (especially HID), control gear, and fixtures from around the world.
DISCLAIMER: THE EXPERIMENTS THAT I CONDUCT INVOLVING UNUSUAL LAMP/BALLAST COMBINATIONS SHOULD NOT BE ATTEMPTED UNLESS YOU HAVE THE PROPER KNOWLEDGE. I AM NOT RESPONSIBLE FOR ANY INJURIES.
|
Emersyn
Member
Offline
Gender:
View
Posts
View Gallery
|
Ah, I meant to say with the naked eye-
Though I suppose I could turn it off and try to catch the decay...
|
|
|
Logged
|
If you have any questions regarding fluorescent lamps, feel free to ask me! I will do my best to answer it!
|
WorldwideHIDCollectorUSA
Member
Offline
Gender:
View
Posts
View Gallery
HID, LPS, and preheat fluorescents forever!!!!!!
|
I often detect magnetic ballast flicker with the naked eye by moving my eyes back and forth while looking at the fixture. If I see a striped pattern while moving my eyes, I can then see the the tubes are running on a magnetic ballast most of the time, but occasionally, electronic ballasts produce a mains flicker when certain components are wearing out.
|
|
|
Logged
|
Desire to collect various light bulbs (especially HID), control gear, and fixtures from around the world.
DISCLAIMER: THE EXPERIMENTS THAT I CONDUCT INVOLVING UNUSUAL LAMP/BALLAST COMBINATIONS SHOULD NOT BE ATTEMPTED UNLESS YOU HAVE THE PROPER KNOWLEDGE. I AM NOT RESPONSIBLE FOR ANY INJURIES.
|
sol
Member
Offline
View
Posts
View Gallery
|
Although not as discreet as moving your eyes, the way I evaluate them is to take a shiny metal object, such as a key or the pocket clip on a pen, and wave it in the light produced by the testing fixture. You'll see immediately if you have mains flicker or not.
|
|
|
Logged
|
|
Emersyn
Member
Offline
Gender:
View
Posts
View Gallery
|
|
|
Logged
|
If you have any questions regarding fluorescent lamps, feel free to ask me! I will do my best to answer it!
|