Working fixture with Westinghouse circlarc lamps « on: March 02, 2024, 02:04:51 AM » Author: WorldwideHIDCollectorUSA
Not too many of these fixtures and lamps around: https://youtu.be/63Zmt8IaBEQ?si=N0xaCG61vAy6IqrB
		Logged

Desire to collect various light bulbs (especially HID), control gear, and fixtures from around the world.

DISCLAIMER: THE EXPERIMENTS THAT I CONDUCT INVOLVING UNUSUAL LAMP/BALLAST COMBINATIONS SHOULD NOT BE ATTEMPTED UNLESS YOU HAVE THE PROPER KNOWLEDGE. I AM NOT RESPONSIBLE FOR ANY INJURIES.

	Re: Working fixture with Westinghouse circlarc lamps « Reply #1 on: March 02, 2024, 02:46:30 AM » Author: LightsAreBright27
I like how they used two circlarc tubes instead of a circline tube ( + = ). I am still curious why they decided to do so.
« Last Edit: March 02, 2024, 02:48:46 AM by LightsAreBright27 »		Logged

Holder of the rare and sacred F10T12/BL lamps here!
Also known as LAB27 for short.
One of the only Indian members here!
245v 50Hz

	Re: Working fixture with Westinghouse circlarc lamps « Reply #2 on: March 02, 2024, 02:48:38 AM » Author: WorldwideHIDCollectorUSA
This was an early attempt to make a round fluorescent fixture where the lamps are semicircle lamps rather than fully round fluorescent lamps like circline fluorescent tubes. These lamps were only produced for a very short time.
		Logged

Desire to collect various light bulbs (especially HID), control gear, and fixtures from around the world.

DISCLAIMER: THE EXPERIMENTS THAT I CONDUCT INVOLVING UNUSUAL LAMP/BALLAST COMBINATIONS SHOULD NOT BE ATTEMPTED UNLESS YOU HAVE THE PROPER KNOWLEDGE. I AM NOT RESPONSIBLE FOR ANY INJURIES.

	Re: Working fixture with Westinghouse circlarc lamps « Reply #3 on: March 02, 2024, 02:51:58 AM » Author: LightsAreBright27
If this has two ballasts, it would be better than a single circline. You could turn one off ,use different colours (if the idea of these lasted long enough to make different types), or if one was EOL, the other would still work. I am not sure about the availability of these tubes, even at that time.
		Logged

Holder of the rare and sacred F10T12/BL lamps here!
Also known as LAB27 for short.
One of the only Indian members here!
245v 50Hz

	Re: Working fixture with Westinghouse circlarc lamps « Reply #4 on: March 02, 2024, 10:25:32 AM » Author: WorldwideHIDCollectorUSA
As far as I understand, these early fluorescent fixtures typically used 2 ballasts.
		Logged

Desire to collect various light bulbs (especially HID), control gear, and fixtures from around the world.

DISCLAIMER: THE EXPERIMENTS THAT I CONDUCT INVOLVING UNUSUAL LAMP/BALLAST COMBINATIONS SHOULD NOT BE ATTEMPTED UNLESS YOU HAVE THE PROPER KNOWLEDGE. I AM NOT RESPONSIBLE FOR ANY INJURIES.

	Re: Working fixture with Westinghouse circlarc lamps « Reply #5 on: March 09, 2024, 05:46:11 AM » Author: Philips tigkas
Quote from: WorldwideHIDCollectorUSA on March 02, 2024, 02:04:51 AM Not too many of these fixtures and lamps around: https://youtu.be/63Zmt8IaBEQ?si=N0xaCG61vAy6IqrB Are these semi circle tubes?
		Logged

LEDs are like an apocalypse! They slowly take over the world wiping out every other type of lamp and fixture!

	Re: Working fixture with Westinghouse circlarc lamps « Reply #6 on: March 09, 2024, 05:46:59 AM » Author: WorldwideHIDCollectorUSA
These are lamps that are shaped like 180 degree arcs.
		Logged

Desire to collect various light bulbs (especially HID), control gear, and fixtures from around the world.

DISCLAIMER: THE EXPERIMENTS THAT I CONDUCT INVOLVING UNUSUAL LAMP/BALLAST COMBINATIONS SHOULD NOT BE ATTEMPTED UNLESS YOU HAVE THE PROPER KNOWLEDGE. I AM NOT RESPONSIBLE FOR ANY INJURIES.

	Re: Working fixture with Westinghouse circlarc lamps « Reply #7 on: March 09, 2024, 12:58:10 PM » Author: Philips tigkas
Wow well that's interesting! I've never seen such thing before. Looks so cool though!
		Logged

LEDs are like an apocalypse! They slowly take over the world wiping out every other type of lamp and fixture!

	Re: Working fixture with Westinghouse circlarc lamps « Reply #8 on: March 16, 2024, 04:25:05 AM » Author: HomeBrewLamps
How do the sockets work? Are they some sort of press fit thing or do the tubes just sit in them?
		Logged

~Owen

Scavenger, Urban Explorer, Lighting Enthusiast and Creator of homebrewlamps

	Re: Working fixture with Westinghouse circlarc lamps « Reply #10 on: July 02, 2024, 04:57:55 AM » Author: funkybulb
That happens to be my channel.  Many of these fixture got thrown out When  home owners finds out the Lamps were no longer made.  I just Happen to got this on Ebay locally And mangage to get extra spare bulbs For them as well.  The lamp kinda installs Same way like u do ubend tubes.
		Logged

No LED gadgets, spins too slowly.  Gotta  love preheat and MV. let the lights keep my meter spinning.