Re-installing fluorescents after a LED conversion

Lighting-Gallery.net | General | General Videos | Topic: Re-installing fluorescents after a LED conversion

« previous next »

Author

Topic: Re-installing fluorescents after a LED conversion (Read 3253 times)

arcblue
Member

Offline

View Posts
View Gallery

So this is what happens when ballasts are removed for a LED conversion but then someone installs fluorescents back into the fixture, not knowing the ballast is no longer there: https://www.youtube.com/watch?v=hTleg8upX6k

Logged

I'm lampin...

WorldwideHIDCollectorUSA
Member

Offline

Gender: Male

View Posts
View Gallery

HID, LPS, and preheat fluorescents forever!!!!!!

I actually posted this video a while back here on LG.

Here is my thread about this same video:

https://www.lighting-gallery.net/index.php?topic=9701.0

« Last Edit: May 08, 2023, 03:31:18 PM by WorldwideHIDCollectorUSA »

Logged

Desire to collect various light bulbs (especially HID), control gear, and fixtures from around the world.

DISCLAIMER: THE EXPERIMENTS THAT I CONDUCT INVOLVING UNUSUAL LAMP/BALLAST COMBINATIONS SHOULD NOT BE ATTEMPTED UNLESS YOU HAVE THE PROPER KNOWLEDGE. I AM NOT RESPONSIBLE FOR ANY INJURIES.

joseph_125
Member

Offline

Gender: Male

View Posts
View Gallery

I guess these are the tubes that are wired to the line on only one end. I have some that use both ends with shunted hot to one end and shunted neutral to the other end. Those might give rather interesting results if someone stuck a fluorescent in them. Especially on a 240v system and with a 2ft or shorter tube.

Logged

Pages: [1]