120v Multi-Volt « on: December 02, 2022, 10:22:30 PM » Author: GE PM
is it possible to connect a 120v ballast to the load side of a Multi-Volt ballast to get 120/208/240/277 volts?
		Logged

Collector of all things GE! Except for LEDs.
Utility Company: SCE

	Re: 120v Multi-Volt « Reply #1 on: December 03, 2022, 12:05:23 AM » Author: WorldwideHIDCollectorUSA
Are you asking about using the ballast as a step up transformer to get access to 208v, 240v, and 277v mains supplies?
		Logged

Desire to collect various light bulbs (especially HID), control gear, and fixtures from around the world.

DISCLAIMER: THE EXPERIMENTS THAT I CONDUCT INVOLVING UNUSUAL LAMP/BALLAST COMBINATIONS SHOULD NOT BE ATTEMPTED UNLESS YOU HAVE THE PROPER KNOWLEDGE. I AM NOT RESPONSIBLE FOR ANY INJURIES.

	Re: 120v Multi-Volt « Reply #2 on: December 31, 2022, 11:34:07 PM » Author: GE PM
Yes!
		Logged

Collector of all things GE! Except for LEDs.
Utility Company: SCE

	Re: 120v Multi-Volt « Reply #3 on: December 31, 2022, 11:48:55 PM » Author: WorldwideHIDCollectorUSA
Yes, you can certainly use a multi volt HID ballast as a step up transformer since all autotransformer ballasts use an integral step up transformer to provide an adequate secondary voltage to keep the intended lamp running.
		Logged

Desire to collect various light bulbs (especially HID), control gear, and fixtures from around the world.

DISCLAIMER: THE EXPERIMENTS THAT I CONDUCT INVOLVING UNUSUAL LAMP/BALLAST COMBINATIONS SHOULD NOT BE ATTEMPTED UNLESS YOU HAVE THE PROPER KNOWLEDGE. I AM NOT RESPONSIBLE FOR ANY INJURIES.