Materials for building magnetically ballasted HID and fluorescent chandeliers « on: November 13, 2021, 06:57:50 PM » Author: WorldwideHIDCollectorUSA
In my dream house, I have been envisioning magnetically ballasted high pressure sodium, metal halide, mercury vapor, low pressure sodium, preheat CFL, and preheat linear fluorescent chandeliers lighting almost every room of my house. I am wondering if anyone knows of any good materials that I can use to build these chandeliers that can support the weight of many magnetic ballasts because I am concerned about the weight of magnetic ballasts causing the chandelier to collapse and pose a lethal safety hazard.
		Logged

Desire to collect various light bulbs (especially HID), control gear, and fixtures from around the world.

DISCLAIMER: THE EXPERIMENTS THAT I CONDUCT INVOLVING UNUSUAL LAMP/BALLAST COMBINATIONS SHOULD NOT BE ATTEMPTED UNLESS YOU HAVE THE PROPER KNOWLEDGE. I AM NOT RESPONSIBLE FOR ANY INJURIES.

	Re: Materials for building magnetically ballasted HID and fluorescent chandeliers « Reply #1 on: November 20, 2021, 01:58:21 PM » Author: AngryHorse
Simply mount them remote  , I use to have halide lamps in my kitchen, the gear sets were mounted under the floorboards upstairs above each light, I also once DID have a halide chandelier!, it was made of brass with glass beads, (to withstand the heat), the lamp was a single 100 watt Osram HQI-E, with the gear again being under the upstairs floorboards above the fixture.
		Logged

Current: UK 230V, 50Hz
Power provider: e.on energy
Street lighting in our town: Philips UniStreet LED (gen 1)
Longest serving LED in service at home, (hour count): Energetic mini clear globe: 57,746 hrs @ 15/12/24

Welcome to OBLIVION