Author Topic: Old GE lighting guide  (Read 2410 times)
Larry
Member
****
Offline

View Posts
View Gallery

Rated PG 17


Old GE lighting guide « on: March 07, 2014, 02:36:59 PM » Author: Larry
A old GE lighting book.
But what I find interesting is that it lists the rare rectified fluorescent F85T10 bulbs that are the odd 58 inches long.

http://www.donsbulbs.com/bulbs/g623/l/ge1e301/19.gif

http://www.donsbulbs.com/cgi-bin/r/t.pl/library1e301ge.html
Logged

Thou shalt not covet thy neighbor's GE Power Groove

mbulb146
Member
**
Offline

View Posts
View Gallery

Re: Old GE lighting guide « Reply #1 on: March 08, 2014, 04:36:37 PM » Author: mbulb146
Interesting catalog, the ballast page shows some 240-280V models.  This must be when 277V commercial wiring practice was just getting started.  At my first job, the factory floor and highbay areas were lit entirely with F96T12/HO fixtures labeled as "265V" (wiring in building was 277/480Y).  The original part of this building was built in the mid-50s, right around the time of that catalog.  Some of the later fixtures (and those in my high school built in 1969) were all labeled 277V.
Logged
Larry
Member
****
Offline

View Posts
View Gallery

Rated PG 17


Re: Old GE lighting guide « Reply #2 on: March 08, 2014, 08:21:31 PM » Author: Larry
Yeah I replaced a lot of 277 volt ballasts back in the early 70s.
That 277 can be wicked if you get across it.

One time I lifted a drop in fixture to get to something else and fire shot past my head to the drop in celling frame.
Then the light went out.
Seems the fixture was operating grounded to the ceiling frame using a 120 ballast on 277.
Really nice modification by some one. :o
Logged

Thou shalt not covet thy neighbor's GE Power Groove

Print 
© 2005-2024 Lighting-Gallery.net | SMF 2.0.19 | SMF © 2021, Simple Machines | Terms and Policies