Re: How to get an 80W HPL-N ballast + bulb to work in Canada? « Reply #16 on: November 08, 2021, 01:08:16 PM » Author: WorldwideHIDCollectorUSA
Another way to get your 220-240v 50hz mercury vapor choke to run your 80w lamp at full power is to use a 120v to 277v step up transformer since the increased OCV from 240v would help compensate for the 20% underdrive.
		Logged

Desire to collect various light bulbs (especially HID), control gear, and fixtures from around the world.

DISCLAIMER: THE EXPERIMENTS THAT I CONDUCT INVOLVING UNUSUAL LAMP/BALLAST COMBINATIONS SHOULD NOT BE ATTEMPTED UNLESS YOU HAVE THE PROPER KNOWLEDGE. I AM NOT RESPONSIBLE FOR ANY INJURIES.

	Re: How to get an 80W HPL-N ballast + bulb to work in Canada? « Reply #17 on: November 08, 2021, 08:14:07 PM » Author: funkybulb
For a start and quick test is get a 4 foot  two lamp HO rapid start ballast  but using one of reds and blue  and cap off rest of unused  ballast leads.   Those ballast runs lamp at 800 mA   85 watt fluorescent  Tubes.   So it should run up 80 watt mercury lamp nicely
		Logged

No LED gadgets, spins too slowly.  Gotta  love preheat and MV. let the lights keep my meter spinning.